Hot tubs are an excellent way to relax after a long day at work. They also provide a lot of health benefits. However, hot tubs require maintenance and upkeep. If you want to keep your hot tub running smoothly, here are some tips to get you started.
Hot tubs are a wonderful addition to any home. They offer relaxation and health benefits. However, they require regular maintenance and upkeep. In this article, we will discuss some of the basic steps involved in maintaining a hot tub.
1) Cleaning Your Hot Tub Regularly
Cleaning is one of the most important things that need to be done on a daily basis. You should clean your hot tub every week or two depending upon how often it gets used. The first thing that needs to be cleaned is the filter system. This can easily be removed by unscrewing the top cap from the bottom of the unit. Once the filter has been taken out, remove all debris such as hair, leaves, etc., using a vacuum cleaner. After cleaning the filter, rinse with warm water so that there is no residue left behind. Next, wash down the sides of the tank with soap and water. Finally, scrub the entire exterior surface of the hot tub thoroughly with a sponge and mild detergent solution. Make sure not to use harsh chemicals because these could damage the finish of the hot tub.
2) Checking for Leaks
Leaking pipes are very common when installing a new hot tub. It’s best to check them before installation. To do this, turn off the power supply to the pump and heater. Then, open up the drain valve located near the base of the hot tub. Check if there is any leakage coming through the pipe. If there is, then repair the leak immediately. Otherwise, wait until the next time you have access to the plumbing lines.
3) Inspecting the Pump System
The pump is another area where leaks may occur. Before starting the pump, make sure that the hose connecting the pump to the spout is properly connected. Also, ensure that the pressure switch is working correctly. A malfunctioning pressure switch means that the pump won’t start even though the water level is high enough. Another problem that might arise is that the motor overheats due to a lack of proper ventilation. Therefore, always inspect the pump regularly.
4) Maintaining Proper Water Levels
It is essential to maintain the correct levels of water inside the hot tub. When the water level reaches its maximum capacity, the jets become ineffective. On the other hand, if the water level drops too low, the jets lose their force. As a result, the user cannot enjoy his/her favorite massage therapy session. Always remember to add more water whenever necessary.
5) Changing Filters
Filtering systems must be changed periodically. Most manufacturers recommend changing filters once per month. Change the filter according to manufacturer instructions. Failure to change the filter regularly can cause serious problems like clogging of the jet holes.
6) Keeping the Unit Cool
Keeping the hot tub cool during the summer months is extremely beneficial. During warmer seasons, the temperature of the hot tub should never exceed 90 degrees Fahrenheit. Never leave the hot tub unattended while it is heating up. Instead, close the door and let the heat dissipate naturally.
7) Avoid Overheating
Overheated hot tubs are dangerous. Heatstroke occurs when the body loses control over thermoregulation. Symptoms include dizziness, nausea, vomiting, confusion, seizures, coma, and death. Keep children away from the hot tub and avoid leaving anyone alone in the hot tub.
8) Prevent Mold Growth
Mold grows quickly in humid environments. Therefore, it is advisable to install a dehumidifier in order to reduce humidity levels. This prevents mold growth on the surface of the hot tub. The same applies to air conditioners as well. Make sure that these appliances run continuously throughout the year.
9) Regularly Checking Your Thermostat Settings
Thermostats play a vital role in regulating the temperatures inside the hot tub. You need to set the desired temperature accordingly. For example, if you prefer warm weather conditions, select a higher setting than what would normally be required. Similarly, if you wish to have cold weather conditions, choose a lower setting. It is important to check the settings frequently so that you do not end up in uncomfortable or unsafe situations.
10) Add Salt When Needed
Saltwater pools add salt to the pool water. As a result, the pH level increases making the water more alkaline. Alkalinity makes the water harder and reduces its ability to hold calcium ions. Calcium ion buildup leads to scale formation. Adding salt to the water keeps the pH balance within acceptable limits.
Regular maintenance ensures that your hot tub remains safe and healthy. Follow all safety precautions before using the hot tub. Also, make sure that you follow the recommended guidelines provided by the manufacturer. Finally, remember to maintain the hot tub properly.
When in the market for a hot tub, look no further than our selection of spas at All Seasons Fireplaces Pools and Spas. Our spas are designed to provide the ultimate relaxation and enjoyment. Whether you’re looking for a traditional hot tub or a luxurious spa, we have the right spa for you. Call us today!
